+84 0246 6868 323
Mr Nam 0904868034
lam.lktech
sales.lktechco@gmail.com
Serial To Ethernet Converter With Poe – Radix/ Ấn Độ
-DCC202
DCC202 is an interface between RS232, RS485 & RS422 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. The browser based configuration utility allows the host IP address and serial settings to be changed.
The DCC202 module offers true IEEE 802.3afcompliant (classification, Class 1) Power Over Ethernet (PoE) functionality using a standard category 5 Ethernet cable to receive power from a PoE switch such as the FS108Pv3. If there is no PoE switch on site, the module will also accept power input from a DC adapter.
See less
10/100 Mbps Ethernet port
Browser based configuration utility
Telnet, TCP Modbus protocols
Serial interface : RS232, RS485, RS422
Configurable baud rate, parity, data bits, stop bits, IP address
12-48 VDC power supply
Default parameters: Can be restored by pressing reset switch at power ON
Mounting : DIN Rail / Surface
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
-DCC203
DCC203 is an interface between RS232, RS485 or RS422 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. It has multiple master access on a single Ethernet port. This allows upto 12 masters to access the same devices on the serial bus. It can be configured as TCP Server or TCP Client. The browser based configuration utility allows the host IP address and serial settings to be changed.
The DCC203 module offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 6 Ethernet cable to receive power from a PoE switch such as the FS108Pv3. If there is no PoE switch on site, the module will also accept power input from a DC adapter.
See less
12 simultaneous MODBUS TCP masters and 32 simultaneous requests for each TCP master
10/100 Mbps Ethernet port
Browser based configuration utility
Telnet, TCP MODBUS protocols
Serial Interface : RS232, RS485, RS422
TCP Server/Client
Configurable baud rate, parity, data bits, stop bits, IP address, TCP MODBUS server port no, remote telnet port number
12-48 VDC power supply
Default parameters: Can be restored by pressing reset switch at power ON
Mounting : DIN Rail / Surface
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
-DCC211
DCC211 is a Serial-to-Ethernet converter. It is an Industrial Terminal Server which functions as a gateway. It has two serial ports (RS232/RS485 slave, RS485 master) and an Ethernet port (master). It finds applications where a SCADA software, a PLC, an HMI or DCS need to communicate with a serial bus (RS232/RS485). Essentially, two masters can access data from slaves on one serial bus. For example, a SCADA software running on a PC is connected to the Ethernet port as master and an HMI is connected to the RS485 port as the second master. Both masters are able to access data from upto 32 devices on an RS485 bus, eg temperature scanners, connected to the RS485 port (slave) of the DCC211. DCC211 is an interface between an RS232 or RS485 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. The web-based configuration utility allows the host IP address and serial settings to be changed. The DCC211 Converter offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 6 Ethernet cable to receive power from any PoE switch. If there is no PoE switch on site, the module will also accept power input from a DC adapter.
See less
ARM Cortex-M4F processor core - 512 KB flash memory, 256 KB single-cycle system SRAM, 6KB of EEPROM
10/100 Mbps Ethernet port
Windows OS & Web based configuration utility
Telnet, TCP Modbus protocols
Serial Interface : RS232, RS485
Configurable baud rate, parity, data bits, stop bits, IP address
12~48 VDC power supply
Mounting : DIN Rail / Surface
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
Giá: Liên hệ
DCC202 is an interface between RS232, RS485 & RS422 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. The browser based configuration utility allows the host IP address and serial settings to be changed.
The DCC202 module offers true IEEE 802.3afcompliant (classification, Class 1) Power Over Ethernet (PoE) functionality using a standard category 5 Ethernet cable to receive power from a PoE switch such as the FS108Pv3. If there is no PoE switch on site, the module will also accept power input from a DC adapter.
See less
10/100 Mbps Ethernet port
Browser based configuration utility
Telnet, TCP Modbus protocols
Serial interface : RS232, RS485, RS422
Configurable baud rate, parity, data bits, stop bits, IP address
12-48 VDC power supply
Default parameters: Can be restored by pressing reset switch at power ON
Mounting : DIN Rail / Surface
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
-DCC203
DCC203 is an interface between RS232, RS485 or RS422 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. It has multiple master access on a single Ethernet port. This allows upto 12 masters to access the same devices on the serial bus. It can be configured as TCP Server or TCP Client. The browser based configuration utility allows the host IP address and serial settings to be changed.
The DCC203 module offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 6 Ethernet cable to receive power from a PoE switch such as the FS108Pv3. If there is no PoE switch on site, the module will also accept power input from a DC adapter.
See less
12 simultaneous MODBUS TCP masters and 32 simultaneous requests for each TCP master
10/100 Mbps Ethernet port
Browser based configuration utility
Telnet, TCP MODBUS protocols
Serial Interface : RS232, RS485, RS422
TCP Server/Client
Configurable baud rate, parity, data bits, stop bits, IP address, TCP MODBUS server port no, remote telnet port number
12-48 VDC power supply
Default parameters: Can be restored by pressing reset switch at power ON
Mounting : DIN Rail / Surface
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
-DCC211
DCC211 is a Serial-to-Ethernet converter. It is an Industrial Terminal Server which functions as a gateway. It has two serial ports (RS232/RS485 slave, RS485 master) and an Ethernet port (master). It finds applications where a SCADA software, a PLC, an HMI or DCS need to communicate with a serial bus (RS232/RS485). Essentially, two masters can access data from slaves on one serial bus. For example, a SCADA software running on a PC is connected to the Ethernet port as master and an HMI is connected to the RS485 port as the second master. Both masters are able to access data from upto 32 devices on an RS485 bus, eg temperature scanners, connected to the RS485 port (slave) of the DCC211. DCC211 is an interface between an RS232 or RS485 bus and an Ethernet port. It converts between MODBUS TCP & MODBUS RTU. The web-based configuration utility allows the host IP address and serial settings to be changed. The DCC211 Converter offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) functionality using a standard category 6 Ethernet cable to receive power from any PoE switch. If there is no PoE switch on site, the module will also accept power input from a DC adapter.
See less
ARM Cortex-M4F processor core - 512 KB flash memory, 256 KB single-cycle system SRAM, 6KB of EEPROM
10/100 Mbps Ethernet port
Windows OS & Web based configuration utility
Telnet, TCP Modbus protocols
Serial Interface : RS232, RS485
Configurable baud rate, parity, data bits, stop bits, IP address
12~48 VDC power supply
Mounting : DIN Rail / Surface
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
Giá: Liên hệ
