RADIX brings you a full range of Thyristor (SCR) Power Regulators, which are compact in size, robust in design and easy to maintain. These Power Regulators control power to the resistive or inductive heating loads which can be single-phase, two-phase or three-phase. They can switch load power extremely fast providing the means to respond rapidly to command changes, load changes & power supply changes. This feature allows the control of fast responding loads and eliminates the negative effects of variations in load or supply voltages that can occur with other types of control. Radix power regulators comprise of triggering card, suitably rated back-to-back connected SCR modules mounted on special aluminium-alloy heat sink duly isolated electrically . In a typical application it consist of a controller and sensing element (Temperature sensor connected to heater or job) in loop with a safety controller.
The cooling is either natural cooling or forced air cooling using high speed noiseless air circulating fan(s). Input and output terminals are clip-on type heavy duty connectors or copper bus bars. For safety, suitably rated semiconductor fuses and thermal cut-out is provided. The entire assembly is mounted on the very sleek and easy to install Anodized Aluminium enclosure with safety ABS removable covers.
General Specifications
Mains power voltage : 110VAC, 220VAC, 380VAC, 440VAC,480VAC, ±10%
Supply voltage : 220VAC, 50/60Hz
Rated current : 25A, 35A, 50A, 60A, 80A, 100A,125A,160A,200A, 250A, 300A, 350A, 400A, 600A, 750A
Working frequency : 50 / 60Hz
Output type : Phase Angle control,
Zero Crossover control (2-leg)
Input control signal
Phase Angle : 4-20mA, 1-5V, 0-10V, 2-10V, 0-5V
Zero crossover : 4-20mA, 1-5V, 0-10V, 2-10V, 0-5V, Pulse input, 8 seconds Soft start, Manual/Auto Relay changed
Output voltage range : 0-100%
Operating environment : 10~50 °C, humidity under 90% RH
Insulation resistance : Over 20M (Power & external cover)
Over 20M (Input Signal & external cover)
Isolation voltage : 2500VAC/1min between power & external cover, 1000VAC/1min between power & external cover
A few of the industrial applications where Radix Power Regulators are used :
Heat Treatment
Automobile Industry
Stress Relieving
Jewellery Industry
Wax Burn Out
DC Rectifiers
Low Voltage - High Current Heating Systems using
Transformers
Injection Moulding Machines
Extruders
Plastic Industries
Environmental Chambers
Upsetting machines for Engine Valve manufacturing
Electromagnetic Cranes
Multizone Heating Systems
Electrolysis
Research Laboratories, Atomic Power Stations … and many more applications
Giá: Liên hệ