+84 0246 6868 323
Mr Nam 0904868034
lam.lktech
sales.lktechco@gmail.com
Float Guided Level Switches - Radix/Ấn Độ
Float guided level switch is a most reliable instrument to sense the liquid level in the industry. It can be used with PLC, DCS, SCADA.
Top mounted level switches work on permanent magnet reed switch basis.The float has a magnetic mechanism within it and moves freely along the guide tube, which contains glass encapsulated hermetically sealed reed switches, located at preset positions. Mounted vertically, these float follows liquid level and magnetically actuates reed swith at preset positions to give a change over contact. Single / multiple switching is effected through single or multiple floats as required by application.
Level Switches should not be used for direct starting / stopping of pumps.
An external relay or contractor must always be used with the level switch
Application Process Fluid (Options - Water, Diesel, Hydraulic Oil,Lube Oil, Petro Chemical, Acid, Milk, Dye Chemical, Hot water,Propane, methanol, alcohol netc.
Total length - as per Customer's requirement (0-5000 mm)
Process connection : threaded BSP, NPT / flanged / triclover
Process connection MOC : SS304 / SS316/ Teflon / Carbon Steel / PP(polypropylene) / PTFE coating (Polytetrafluoroethylene)
Wetted parts - MOC : SS304 / SS316/ Teflon / Carbon Steel / PP(polypropylene) / PTFE coating (Polytetrafluoroethylene)
Float dimensions : depends on range
No. of floats 1 / 2 / 3 / 4
Type/qty of switches SPST reed switch / DPDT reed switch, SPDT microswitch, DPDT microswitch
quantity of switch : 1 / 2 / 3 / 4
Preset level : Maximum 4
Reed switch rating 50 / 60 / 100 VA
Maximum switching voltage 24VDC / 230V AC
Maximum Process temperature 150 degree C
Maximum Process pressure 10 kg/cm2
Specific gravity 0.7 and above (below 0.7 in special case)
Enclosure MOC Die cast aluminium / PP / SS / cable
Enclosure protection class Weatherproof IP66 / IP68 / IIA / IIB / IIC
Cable Glad :3/4 " ET / 1/2 " NPT / M20 Vent Connection : Plug / Valve / Flange
Giá: Liên hệ
Top mounted level switches work on permanent magnet reed switch basis.The float has a magnetic mechanism within it and moves freely along the guide tube, which contains glass encapsulated hermetically sealed reed switches, located at preset positions. Mounted vertically, these float follows liquid level and magnetically actuates reed swith at preset positions to give a change over contact. Single / multiple switching is effected through single or multiple floats as required by application.
Level Switches should not be used for direct starting / stopping of pumps.
An external relay or contractor must always be used with the level switch
Application Process Fluid (Options - Water, Diesel, Hydraulic Oil,Lube Oil, Petro Chemical, Acid, Milk, Dye Chemical, Hot water,Propane, methanol, alcohol netc.
Total length - as per Customer's requirement (0-5000 mm)
Process connection : threaded BSP, NPT / flanged / triclover
Process connection MOC : SS304 / SS316/ Teflon / Carbon Steel / PP(polypropylene) / PTFE coating (Polytetrafluoroethylene)
Wetted parts - MOC : SS304 / SS316/ Teflon / Carbon Steel / PP(polypropylene) / PTFE coating (Polytetrafluoroethylene)
Float dimensions : depends on range
No. of floats 1 / 2 / 3 / 4
Type/qty of switches SPST reed switch / DPDT reed switch, SPDT microswitch, DPDT microswitch
quantity of switch : 1 / 2 / 3 / 4
Preset level : Maximum 4
Reed switch rating 50 / 60 / 100 VA
Maximum switching voltage 24VDC / 230V AC
Maximum Process temperature 150 degree C
Maximum Process pressure 10 kg/cm2
Specific gravity 0.7 and above (below 0.7 in special case)
Enclosure MOC Die cast aluminium / PP / SS / cable
Enclosure protection class Weatherproof IP66 / IP68 / IIA / IIB / IIC
Cable Glad :3/4 " ET / 1/2 " NPT / M20 Vent Connection : Plug / Valve / Flange
Giá: Liên hệ
.jpg "Differential Pressure Transmitter - Radix/Ấn Độ")
