+84 0246 6868 323
Mr Nam 0904868034
lam.lktech
sales.lktechco@gmail.com
Carbon Dioxide/Temperature Transmitter - Radix/ Ấn Độ
-The SERIES CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength nondispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied* and unoccupied buildings against light source aging effects. The single beam dual wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve a higher level of accuracy, the Series CDT includes digital barometric pressure adjustment and the ability to field-calibrate the sensor. For applications that require visual indication, the wall mount configurations of the Series CDT can be ordered with an integral LCD display. Push buttons are standard on all configurations of the transmitters for access to the menu structure, but wall mount configurations can be ordered without the buttons. To prevent tampering, the action of the buttons can be locked out using an internal dip switch selection.
*For buildings occupied 24 hours per day, it is recommended that calibration be verified every 6 to 12 months depending on application.
Single beam dual-wavelength sensor advantages:
Automatically corrects for aging effects in occupied and unoccupied buildings
Perfect for hospitals and manufacturing plants that are occupied 24 hours per day
Measures actual unfiltered light intensity directly
Eliminates error from incorrect assumptions of gas concentration in theoretical logic assumption methods
Single beam dual wavelength NDIR sensor eliminates draft due to light source ageing
Integral passive temperature outputs reduce number of devices mounted in the space
Service display tool available for models without an integral LED
Optional integral display and relay output
-Series CDTR Carbon Dioxide, Relative Humidity and Temperature Transmitters reduce the number of sensors mounted on a wall or in a duct. By combining CO2, RH, and temperature in one device, system integrators are able to lower installation time of mounting multiple housings, while lowering material cost at the same time. Even with the three sensors combined into a single unit, replacement cost is not increased due to the pluggable nature of the humidity sensor, which allows it or the temperature to be replaced at a fraction of the cost of a new CO2 transmitter.
Like our popular Series CDT Carbon Dioxide Transmitter, a single-beam dualwavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied* and unoccupied buildings against light source aging effects. The single-beam dual-wavelength sensor technology provides a higher level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve the best possible accuracy, the Series CDTR also includes digital barometric pressure adjustment and the ability to field-calibrate the sensor.
Universal outputs for both carbon dioxide and relative humidity allow users to select the transmitter output to be 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC to work with virtually any building management controller. Additionally, passive thermistor or RTD sensor can be ordered for a temperature output. An optional relay for the carbon dioxide measurement can be used to control exhaust fans, open actuated windows or dampers, or signal a light or horn. For applications that require visual indication, the wall mount configurations of the Series CDTR can be ordered with an integral LCD display. When ordering a duct mount configuration or a wall mount configuration without the display, the Model A- 449 or A-449A remote LCD display can plug into the miniature connector port on the transmitter. The display can be configured to display temperature only, relative humidity only, CO2 only, CO2 and humidity, or CO2 and temperature. Push buttons are standard on all configurations of the transmitters for access to the menu structure, but wall mount configurations can be ordered without the buttons. To prevent tampering, the action of the buttons can be locked out using an internal jumper selection. Menu items that can be accessed via the push buttons include: engineering units, relay output set points, display configuration, transmitter output scaling, ambient barometric pressure, and field calibration of the transmitter.
See less
Range:CO2: 0 to 2000 or 0 to 5000 ppm (depending on model); Relative Humidity: 0 to 100% ; Temperature: 32 to 122°F (0 to 50°C).
Accuracy:±40 ppm + 3% of reading (CO2); ±2% (RH).
Temperature Dependence:±8 ppm/ °C at 1100 ppm.
Non-Linearity:16 ppm.
Pressure Dependence:0.13% of reading per mm of Hg.
Response Time:2 minutes for 99% step change.
Temperature Limits:32 to 122°F (0 to 50°C).
Humidity Limits:10 to 95% RH (non-condensing).
Power Requirements:16 to 35 VDC / 19 to 28 VAC.
Power Consumption:Average: 2 watts; Peak: 3.75 watts.
Sensor:Single-beam, dual-wavelength NDIR.
Output:Current: 4 to 20 mA (max 500 O); Voltage: 0 to 5 VDC or 0 to 10 VDC (min 500 ?); Relay: SPST NO 2A @ 30 VDC; RTD or thermistor per r-t curves (depending on model).
Weight:5.6 oz (158.8 g).
Agency Approvals:CE.
Giá: Liên hệ
*For buildings occupied 24 hours per day, it is recommended that calibration be verified every 6 to 12 months depending on application.
Single beam dual-wavelength sensor advantages:
Automatically corrects for aging effects in occupied and unoccupied buildings
Perfect for hospitals and manufacturing plants that are occupied 24 hours per day
Measures actual unfiltered light intensity directly
Eliminates error from incorrect assumptions of gas concentration in theoretical logic assumption methods
Single beam dual wavelength NDIR sensor eliminates draft due to light source ageing
Integral passive temperature outputs reduce number of devices mounted in the space
Service display tool available for models without an integral LED
Optional integral display and relay output
-Series CDTR Carbon Dioxide, Relative Humidity and Temperature Transmitters reduce the number of sensors mounted on a wall or in a duct. By combining CO2, RH, and temperature in one device, system integrators are able to lower installation time of mounting multiple housings, while lowering material cost at the same time. Even with the three sensors combined into a single unit, replacement cost is not increased due to the pluggable nature of the humidity sensor, which allows it or the temperature to be replaced at a fraction of the cost of a new CO2 transmitter.
Like our popular Series CDT Carbon Dioxide Transmitter, a single-beam dualwavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied* and unoccupied buildings against light source aging effects. The single-beam dual-wavelength sensor technology provides a higher level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve the best possible accuracy, the Series CDTR also includes digital barometric pressure adjustment and the ability to field-calibrate the sensor.
Universal outputs for both carbon dioxide and relative humidity allow users to select the transmitter output to be 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC to work with virtually any building management controller. Additionally, passive thermistor or RTD sensor can be ordered for a temperature output. An optional relay for the carbon dioxide measurement can be used to control exhaust fans, open actuated windows or dampers, or signal a light or horn. For applications that require visual indication, the wall mount configurations of the Series CDTR can be ordered with an integral LCD display. When ordering a duct mount configuration or a wall mount configuration without the display, the Model A- 449 or A-449A remote LCD display can plug into the miniature connector port on the transmitter. The display can be configured to display temperature only, relative humidity only, CO2 only, CO2 and humidity, or CO2 and temperature. Push buttons are standard on all configurations of the transmitters for access to the menu structure, but wall mount configurations can be ordered without the buttons. To prevent tampering, the action of the buttons can be locked out using an internal jumper selection. Menu items that can be accessed via the push buttons include: engineering units, relay output set points, display configuration, transmitter output scaling, ambient barometric pressure, and field calibration of the transmitter.
See less
Range:CO2: 0 to 2000 or 0 to 5000 ppm (depending on model); Relative Humidity: 0 to 100% ; Temperature: 32 to 122°F (0 to 50°C).
Accuracy:±40 ppm + 3% of reading (CO2); ±2% (RH).
Temperature Dependence:±8 ppm/ °C at 1100 ppm.
Non-Linearity:16 ppm.
Pressure Dependence:0.13% of reading per mm of Hg.
Response Time:2 minutes for 99% step change.
Temperature Limits:32 to 122°F (0 to 50°C).
Humidity Limits:10 to 95% RH (non-condensing).
Power Requirements:16 to 35 VDC / 19 to 28 VAC.
Power Consumption:Average: 2 watts; Peak: 3.75 watts.
Sensor:Single-beam, dual-wavelength NDIR.
Output:Current: 4 to 20 mA (max 500 O); Voltage: 0 to 5 VDC or 0 to 10 VDC (min 500 ?); Relay: SPST NO 2A @ 30 VDC; RTD or thermistor per r-t curves (depending on model).
Weight:5.6 oz (158.8 g).
Agency Approvals:CE.
Giá: Liên hệ
