Công tắc/áp kế áp suất vi sai Mini-Photohelic® - Radix/ Ấn Độ

The Series MP Mini-Photohelic® differential pressure switch/gage combines the time proven Minihelic® II differential pressure gage with two SPDT switching set points. The Mini-Photohelic® switch/gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.

See less
GAGE SPECIFICATIONS
Service: Air and non-combustible, compatible gases
Wetted Materials: Consult factory
Accuracy: ±5% of FS @ 70°F (21.1°C). Gage face mounted in vertical position
Pressure Limits: 30 psig (2.067 bar)
Temperature Limits: 20 to 120°F (-6.7 to 49°C)
Process Connections: Barbed for 3/16" I.D. tubing; 1/8" male NPT optional
Size: 4-1/8" (104.78 mm) depth x 3-1/16" (77.79 mm) diameter
Weight: 23 oz (652 g)
SWITCH SPECIFICATIONS
Switch Type: (2) SPDT relays
Electrical Rating: 5A @ 120/240 VAC Resistive; 5A @ 30 VDC
Electrical Connections: Screw type terminal block. Accepts 22-12 AWG wire.
Power Requirements: 24 VDC/24 VAC 50/60 Hz 4 watts
Mounting Orientation: Gage face in vertical position
Set Point Adjustment: Push Buttons
Standard Accessories: (2) mounting screws, (1) .050" hex allen wrench
Agency Approvals: CE, cUL, UL.
Giá: Liên hệ