+84 0246 6868 323
Mr Nam 0904868034
lam.lktech
sales.lktechco@gmail.com
Digital Temperature Indicator Radix/Ấn độ
EK0SP is a Digital Temperature Indicator accepting J and K type thermocouples, Pt100 RTDs, millivolt and 4 - 20 mA current input. The large 3½-digit display indicates process temperature. EK0SP is accurate to 1% for thermocouples, 0.2% for RTDs and 0.1% for linear (current or voltage) input. The indicator has zero wiring, a very reliable and stable design. It retransmits a 4 - 20 isolated output to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. By including input terminals in the excitation loop, EK0SP provides power for two-wire 4-20 transmitters.
See less
J, K thermocouples, Pt100 RTD, mV, 4-20 mA inputs
Accuracy
Modular, zero wiring high reliability design
Hysteresis or reset control on front panel
4-20 mA retransmission output
Transmitter excitation supply
EK490 is a Digital Temperature Indicator accepting J and K type thermocouples, Pt100 RTDs, millivolt and 4 - 20 mA current input. The large 3½-digit display indicates process temperature. EK490 is accurate to 1% for thermocouples, 0.2% for RTDs and 0.1% for linear (current or voltage) input. The indicator has zero wiring, a very reliable and stable design. It retransmits a 4 - 20 isolated output. Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. By including input terminals in the excitation loop, EK490 provides power for two-wire 4-20 transmitters.
EK450 is a Digital Temperature Indicator accepting J and K type thermocouples, Pt100 RTDs, millivolt and 4 - 20 mA current input. The large 4½-digit display indicates process temperature. EK450 is accurate to 1% for thermocouples, 0.2% for RTDs and 0.1% for linear (current or voltage) input. The indicator has zero wiring, a very reliable and stable design. It retransmits a 4 - 20 isolated output. Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. By including input terminals in the excitation loop, EK450 provides power for two-wire 4-20 transmitters.
Giá: Liên hệ
See less
J, K thermocouples, Pt100 RTD, mV, 4-20 mA inputs
Accuracy
Modular, zero wiring high reliability design
Hysteresis or reset control on front panel
4-20 mA retransmission output
Transmitter excitation supply
EK490 is a Digital Temperature Indicator accepting J and K type thermocouples, Pt100 RTDs, millivolt and 4 - 20 mA current input. The large 3½-digit display indicates process temperature. EK490 is accurate to 1% for thermocouples, 0.2% for RTDs and 0.1% for linear (current or voltage) input. The indicator has zero wiring, a very reliable and stable design. It retransmits a 4 - 20 isolated output. Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. By including input terminals in the excitation loop, EK490 provides power for two-wire 4-20 transmitters.
EK450 is a Digital Temperature Indicator accepting J and K type thermocouples, Pt100 RTDs, millivolt and 4 - 20 mA current input. The large 4½-digit display indicates process temperature. EK450 is accurate to 1% for thermocouples, 0.2% for RTDs and 0.1% for linear (current or voltage) input. The indicator has zero wiring, a very reliable and stable design. It retransmits a 4 - 20 isolated output. Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. By including input terminals in the excitation loop, EK450 provides power for two-wire 4-20 transmitters.
Giá: Liên hệ
