Dust Collector Timer Controller - Radix/ Ấn Độ

Simplify your on-demand cleaning requirements with the Series DCT1000DC Dust Collector Timer Controller. Relying on one timer board for on demand and continuous cleaning applications, the DCT1000DC eliminates external devices such as pressure switches, relays and timers. The DCT1000DC accepts 10-30 VDC power. The units modular design allows for use as a continuous cleaning control or on demand cleaning control using the optional DCP plug-in pressure module. A 4-20 mA process output is integral to the DCP pressure module, eliminating the need to purchase an expensive process transmitter. A solenoid fault light on the DCT1000DC notifies the operator when a solenoid valve fails to activate properly. The DCT1000DC is the same size for 6, 10 and 22 channels. One board size allows the standardization on one enclosure.

See less
DCT1000DC TIMER CONTROLLER
Output Channels: 6, 10 & 22 channels
Power Requirements: 10-30 VDC
Power Consumption: 5 W
Solenoid Supply: 3A maximum per channel
Fuse: 3 A @ 250 VAC
Temperature Limits: -40 to 140°F (-40 to 60°C)
Storage Temperature Limits: -40 to 176°F (-40 to 80°C)
On-time: 10 msec to 600 msec, 10 msec steps
On-time Accuracy: ±10 msec
Off-time: 1 second to 255 seconds, 1 second steps
Off-time Accuracy: ±1% of the value or ±50 msec, whichever is greater
Weight: 1 lb, 3.0 oz (538.6 g)
Agency Approvals: CE
DCP PRESSURE MODULE
Pressure Ranges: 10" w.c. or 20" w.c.
Temperature Limits: -40 to 140°F (-40 to 60°C)
Pressure Limits: 10 psi (68.95 kPa)
Pressure Limits (differential): 10 psi (68.95 kPa)
Accuracy: ±1.5% F.S. @ 73°F (22.8°C)
Output Signal: 4-20 mA
Alarm Contacts: 1.5A inductive load, 3A resistive load @ 30 VAC or 40 VDC
Process Connections: Two barbed connections for use with 1/8" (3.18 mm) or 3/16" (4.76 mm) I.D. tubing
Weight: 5.5 oz (155.9 g)
Giá: Liên hệ