+84 0246 6868 323
Mr Nam 0904868034
lam.lktech
sales.lktechco@gmail.com
Flameproof Instruments-Radix/ Ấn độ
Radix Flameproof Controllers offer the same features as our regular controllers, such as time-proportional control, sensor-break indication, on-site setpoint and relay programming and isolated retransmission, but like other flameproof equipments, in a robust enclosure with various degrees of ingress and gas group protection.
-X96P (FLAMEPROOF)
X96P is a full-featured PID controller designed for use in hazardous environments. It is housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA and IIB with IP65 rating - completely dust proof and a good level of protection against water. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100, Cu53 as well as other 3-wire RTD sensors, 0 - 50 mV voltage and 4-20 mA or 0 - 20 mA analog current signals. A triple 7-segment LED display and individual LEDs on the front of the process controller indicate set point and process values, relay status, auto/manual power status and communication status. Buttons on the front of X96P ,accessible through the flameproof enclosure, allow operators to easily set up to 5 set points - 4 for the relays and a 4 - 20 mA signal. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. X96P's electromagnetic relays trigger heating, cooling or any of 6 types of alarms - full-scale high/low, deviation high/low, in band and out band. It also retransmits an isolated output (1 or 2) signal to other devices such as a Programmable Logic Controller (PLC). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. X96P is an auto-tuning controller, from cold start or at set point. Typical applications are temperature control, RH control, thyristorised heating applications, AHU control in HVAC and BMS applications.
See less
2 x Universal inputs
Upto 5 setpoints - 4 relays + 4 - 20 mA
Autotuning : From cold start or at setpoint
RS485 / MODBUS RTU, isolated
85~265 V AC SMPS, 24 VDC, 24 VAC
Auto / Manual selection
2 x Isolated 0/4-20 mA or 0-10V DC outputs for control / retransmission
-X96 (FLAMEPROOF)
Universal input
Upto 5 setpoints - 4 relays + 4 - 20 mA
Autotuning: From cold start or at setpoint
RS485 / MODBUS RTU, isolated
85 - 265 V AC SMPS, 24 VDC, 24 VAC
Auto / Manual selection
Isolated 0/4 - 20 mA or 0 - 10V DC for control / retransmission output
PID, Proportional and ON-OFF control
-X48V1 (FLAMEPROOF)
-X96A (FLAMEPROOF)
-X48AV1 (FLAMEPROOF)
-TC96 (FLAMEPROOF
-TEC302 (FLAMEPROOF)
-TC48V3 (FLAMEPROOF)
-X96 DELTA (FLAMEPROOF)
-RCT202 (FLAMEPROOF)
-RCT206 (FLAMEPROOF)
-FLT401/FLT601 (FLAMEPROOF)
-RCT301 (FLAMEPROOF)
-RCT605 (FLAMEPROOF) Giá: Liên hệ
-X96P (FLAMEPROOF)
X96P is a full-featured PID controller designed for use in hazardous environments. It is housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA and IIB with IP65 rating - completely dust proof and a good level of protection against water. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100, Cu53 as well as other 3-wire RTD sensors, 0 - 50 mV voltage and 4-20 mA or 0 - 20 mA analog current signals. A triple 7-segment LED display and individual LEDs on the front of the process controller indicate set point and process values, relay status, auto/manual power status and communication status. Buttons on the front of X96P ,accessible through the flameproof enclosure, allow operators to easily set up to 5 set points - 4 for the relays and a 4 - 20 mA signal. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. X96P's electromagnetic relays trigger heating, cooling or any of 6 types of alarms - full-scale high/low, deviation high/low, in band and out band. It also retransmits an isolated output (1 or 2) signal to other devices such as a Programmable Logic Controller (PLC). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. X96P is an auto-tuning controller, from cold start or at set point. Typical applications are temperature control, RH control, thyristorised heating applications, AHU control in HVAC and BMS applications.
See less
2 x Universal inputs
Upto 5 setpoints - 4 relays + 4 - 20 mA
Autotuning : From cold start or at setpoint
RS485 / MODBUS RTU, isolated
85~265 V AC SMPS, 24 VDC, 24 VAC
Auto / Manual selection
2 x Isolated 0/4-20 mA or 0-10V DC outputs for control / retransmission
-X96 (FLAMEPROOF)
Universal input
Upto 5 setpoints - 4 relays + 4 - 20 mA
Autotuning: From cold start or at setpoint
RS485 / MODBUS RTU, isolated
85 - 265 V AC SMPS, 24 VDC, 24 VAC
Auto / Manual selection
Isolated 0/4 - 20 mA or 0 - 10V DC for control / retransmission output
PID, Proportional and ON-OFF control
-X48V1 (FLAMEPROOF)
-X96A (FLAMEPROOF)
-X48AV1 (FLAMEPROOF)
-TC96 (FLAMEPROOF
-TEC302 (FLAMEPROOF)
-TC48V3 (FLAMEPROOF)
-X96 DELTA (FLAMEPROOF)
-RCT202 (FLAMEPROOF)
-RCT206 (FLAMEPROOF)
-FLT401/FLT601 (FLAMEPROOF)
-RCT301 (FLAMEPROOF)
-RCT605 (FLAMEPROOF) Giá: Liên hệ
