-MSI7P is a signal isolator utilized to prevent damage to valuable PLCs, DCS, etc. from fluctuations in the input signal from field devices. It is also a signal multiplier that can retransmit up to 5 output signals from 1 input signal. It receives input from Zirconia oxygen probes. The signal isolator’s range is 0-20.9 %O2 and -8.5mv ~ 3800mv. Versions for universal input and carbon potential are also available. Standard outputs include current and voltage, if our customer desires non-standard outputs, each must be specified. MSI7P provides signal isolation of 1 KV AC RMS/1 minute and 250 V AC RMS/continuous between its own power supply, the input and output. The operator calibrates ZERO and SPAN for the isolator via membrane keys on the front of the unit. MSI7P features a single programmable LCD display, which indicates percentage oxygen, type of thermocouple, process value, output signal and output signal percentage.
See less
Input : Oxygen Lambda Sensor
Direct display of %O2
Up to 5 x 4 - 20 mA (or voltage) outputs
Input/supply/outputs mutually isolated
85–265 V AC/DC or 20-30 V DC power supply
Calibration through keys - no trimpots
2 x 16 character LCD display
RS485/MODBUS RTU option
-MSI7P is a signal isolator utilized to prevent damage to valuable PLCs, DCS, etc. from fluctuations in the input signal from field devices. It is also a signal multiplier that can retransmit up to 5 output signals from 1 input signal. It receives input from Zirconia oxygen probes and 3 types of thermocouples (K, R, S). Versions for universal input and only oxygen sensors are also available. Standard outputs include current and voltage, if our customer desires non-standard outputs, each must be specified. Outputs may be assigned to carbon potential, temperature (?°C) or oxygen probe (mV). MSI7P provides signal isolation of 1 KV AC RMS/1 minute and 250 V AC RMS/continuous between its own power supply, the input and output. The operator calibrates ZERO and SPAN for the isolator via membrane keys on the front of the unit. MSI7P features a single programmable LCD display, which indicates carbon potential, type of thermocouple, process value, output signal and output signal percentage.
See less
Input : Oxygen probe or Thermocouple (K, R, S)
Direct display of carbon potential
Up to 5 x 4 - 20 mA (or voltage) outputs
Input/supply/outputs mutually isolated
85–265 V AC/DC or 20-30 V DC power supply
Calibration through keys - no trimpots
2 x 16 character LCD display
RS485/MODBUS RTU option
-MSI7P is a signal isolator utilized to prevent damage to valuable PLCs, DCS, etc. from fluctuations in the input signal from field devices. It is also a signal multiplier that can retransmit up to 5 output signals from 1 input signal. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt50, Pt100 and Cu53 3-wire RTD sensors, 0 - 50 mV voltage and 4-20 mA or 0 - 20 mA linear inputs. Special versions for oxygen probes and oxygen lambda sensors are also available. MSI7P provides signal isolation of 1 KV AC RMS/1 minute and 250 V AC RMS/continuous between its own power supply, the input and output. The operator calibrates ZERO and SPAN for the isolator via membrane keys on the front of the unit. MSI7P features a single programmable LCD display, which indicates the type of thermocouple, process value, output signal and output signal percentage.
See less
Universal input or AC Current/Voltage
Programmable Ranges
Up to 5 x 4 - 20 mA (or voltage) outputs
Input/supply/outputs mutually isolated
85–265 V AC/DC or 20-30 V DC power supply
Calibration through keys - no trimpots
2 x 16 character LCD display
RS485/MODBUS RTU option
Giá: Liên hệ